This is an ADVANCED swath-width calculator for a Dual Head Multibeam system that allows for asymmetric swaths. Enter each sonar's parameters including, physical sonar mount tilt, lateral sonar offset from…
Calculate the line spacing required and view the cross-section areas for a tilted multibeam sonar head. X-Axis = Positive Forward Roll = Positive as Port side goes upY-Axis = Positive…
Calculate the total time a survey will take given using a traditional (single-swath) MBES. You must enter the swath width, size of the survey area, average depth and speed of…
Calculates the resultant along-track and across-track beamwidths of a multibeam echosounder at a specific frequency using the known beamwidths at a specific reference frequency. Sonar Settings: Enter the Beamwidths of…
Surveying has been called the second oldest profession in the world. However, at some point before angles were taken, someone stuck a stick in the water to determine how deep…
It is written in stone, somewhere in the ancient library of Multibeam Surveys, that Yaw Patch Test Lines MUST be in the same direction. The results are shown below: Yaw…
This calculator has been superseded by a new page (link below) that calculates Line Spacing for all three Patch Tests when using a tilted head. https://mosaichydro.com/mbes-patch-test-tilted-head-line-spacing-calculator/
This tool calculates the number of sonar hits (beams or soundings) in a user-specified square grid cell based on Swath Width, Sonar Range, Sonar Altitude, Speed of Advance, and Ping…
This tool calculates the resultant lever arm (shifted port/stbd & up/down) after rotating the sonar on a tilt adapter. Start with your current lever arm and the vertical distance from…
This tool calculates two sets of line-pair spacings to reduce the data acquisition time compared to running lines with a set line spacing by over 35%. Referring to the diagram…